Surly Disc Trucker 700c Geometry & Bikepacking Bag Fit
The same page we read this geometry from. We don't hold live pricing or stock for frames, so check both there.
We may earn a commission if you buy through this link, at no extra cost to you.
Surly Disc Trucker 700c frame geometry, drawn to scale
Every tube angle and length below is from the published chart, not an illustration. The front triangle area is the number that decides which frame bags fit — and it changes a lot across sizes.
What this frame gives a loaded bike
Chainstay length is the gap between the seat tube and the rear axle, which a rack, panniers and your heels all have to share. Bottom bracket drop is how far the cranks sit below the axles. Both are compared against the median across every current frame we hold.
450mm chainstays, 15mm longer than the 435mm median across the 65 current frames here. Bottom bracket drop 80mm, 10mm more than the 70mm median. The fork publishes cargo mounts, and the frame publishes bottle or accessory mounts. A rear rack bolts straight on. Widest published tire 47mm on 700c / 29in. Surly publishes no dropper routing for this frame.
Every figure above is the manufacturer's, computed against the rest of the database. It says what the frame allows, not how it feels — nobody here has ridden it.
What it can carry
Mount provision and clearance, as Surly publishes it.
Surly's wording: “700c x 47mm with or without fenders”
Geometry
All figures in millimeters except angles. Effective top tube and seat tube are the two that decide frame bag fit.
| Size | Eff. top tube | Seat tube | Standover | Head tube | Stack | Reach | Chainstay | Wheelbase | BB drop | Head angle | Seat angle |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 56cm | 575 | 560 | 813 | 175 | 613 | 387.5 | 450 | 1051 | 80 | 72° | 73° |
| 58cm | 590 | 580 | 831 | 195 | 632 | 391 | 450 | 1060 | 80 | 72° | 72.5° |
| 60cm | 605 | 600 | 850 | 215 | 651.5 | 400 | 450 | 1075.5 | 80 | 72° | 72.5° |
| 62cm | 620 | 620 | 869 | 235 | 670.5 | 402 | 450 | 1084 | 80 | 72° | 72° |
| 64cm | 635 | 640 | 885 | 250 | 685 | 412.5 | 450 | 1090 | 80 | 72° | 72° |
Bottom bracket height
Roughly 295mm off the ground. Surly doesn't publish this directly — we derive it from their BB drop and a typical 75cm tire diameter, so treat it as indicative rather than exact. It changes with the tire you fit. Lower means more stable and more pedal strikes; higher means the opposite.
Source — Surly's own geometry chart: https://surlybikes.com/products/disc-trucker-700c-hi-viz-black — checked 2026-08-16. A dash means the figure isn't published; we leave it blank rather than estimate.
Note: Current Surly page does not publish a model year; listed online as sold out at time checked.
How the Disc Trucker 700c compares
Against the frames people actually cross-shop it with — both charts held together, on the specs that decide what the bike carries.
Questions people ask about this frame
Answered from what Surly publish. Where they publish nothing, that is what it says.
Does the Disc Trucker 700c take fork cargo cages?
Yes — 2 cages. Surly publish cargo-cage mounts on the fork, one set per leg.
What is the widest tyre the Disc Trucker 700c takes?
47mm on 700c / 29in. That is the frame figure rather than the fork's, and it is what limits a loaded bike.
Will a seat pack work on the Disc Trucker 700c?
A seat pack is the straightforward answer here. Surly publish no dropper routing for this frame, so nothing is competing with the pack for seatpost length.
Which frame bags fit
Every frame bag we track, checked against this frame's published geometry. Pick your size.
Checking 16 frame bags against a 605mm effective top tube and 600mm seat tube. 16 fit.
Frame bag fit is calculated from Surly's published geometry, so it's as reliable as their chart. Seat packs and handlebar rolls depend on your exposed seatpost and bar width, which no geometry table lists — the bag finder covers those once you add your own measurements.