Trek Farley 5Geometry & Bikepacking Bag Fit2026
What this frame gives a loaded bike
Chainstay length is the gap between the seat tube and the rear axle, which a rack, panniers and your heels all have to share. Bottom bracket drop is how far the cranks sit below the axles. Both are compared against the median across every current frame we hold.
450mm chainstays, 15mm longer than the 435mm median across the 66 current frames here. Bottom bracket drop 65mm, 5mm less than the 70mm median. The fork publishes cargo mounts, and the frame publishes bottle or accessory mounts. A rear rack bolts straight on. Widest published tire 114mm on 650b / 27.5in. It takes a dropper post.
Every figure above is the manufacturer's, computed against the rest of the database. It says what the frame allows, not how it feels — nobody here has ridden it.
What it can carry
Mount provision and clearance, as Trek publishes it.
Trek's wording: “27.5x4.50"”
Geometry
All figures in millimeters except angles. Effective top tube and seat tube are the two that decide frame bag fit.
| Size | Eff. top tube | Seat tube | Standover | Head tube | Stack | Reach | Chainstay | Wheelbase | BB drop | Head angle | Seat angle |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S | 565 | 380 | 730 | 90 | 589 | 400 | 450 | 1097 | 65 | 68.5° | 74° |
| M | 598 | 420 | 740 | 100 | 599 | 430 | 450 | 1131 | 65 | 68.5° | 74° |
| L | 633 | 450 | 760 | 115 | 613 | 460 | 450 | 1166 | 65 | 68.5° | 74° |
| XL | 672 | 490 | 780 | 130 | 626 | 495 | 450 | 1207 | 65 | 68.5° | 74° |
Bottom bracket height
Roughly 306mm off the ground. Trekdoesn't publish this directly — we derive it from their BB drop and a typical 74.2cm tire diameter, so treat it as indicative rather than exact. It changes with the tire you fit. Lower means more stable and more pedal strikes; higher means the opposite.
Source — Trek's own geometry chart: https://www.trekbikes.com/us/en_US/bikes/mountain-bikes/fat-bikes/farley/farley-5/p/1048697/ — checked 2026-08-18. A dash means the figure isn't published; we leave it blank rather than estimate.
Note: Geometry published in cm and converted. Trek publishes no explicit frame BOTTLE mount wording for this model; the accessory mounts recorded here are Trek’s own words. Internal rear derailleur and dropper post routing; 197x12mm rear, 100mm threaded BB, UDH.
Which frame bags fit
Every frame bag we track, checked against this frame's published geometry. Pick your size.
Checking 19 frame bags against a 633mm effective top tube and 450mm seat tube. 19 fit.
Read these as conservative. This size has a steeply sloping top tube — the seat tube is only 71% of the effective top tube. Bag makers publish a minimum seat tube length assuming a roughly level top tube, so on a frame like this the comparison understates how much room you actually have. The front triangle here is about 1375 cm², which is the number that actually decides what fits. Several bags marked unlikely below will physically fit. Half-frame bags don't depend on seat tube length at all.
Frame bag fit is calculated from Trek's published geometry, so it's as reliable as their chart. Seat packs and handlebar rolls depend on your exposed seatpost and bar width, which no geometry table lists — the bag finder covers those once you add your own measurements.