Surly Krampus Rigid Geometry & Bikepacking Bag Fit
The same page we read this geometry from. We don't hold live pricing or stock for frames, so check both there.
We may earn a commission if you buy through this link, at no extra cost to you.
Surly Krampus Rigid frame geometry, drawn to scale
Every tube angle and length below is from the published chart, not an illustration. The front triangle area is the number that decides which frame bags fit — and it changes a lot across sizes.
What this frame gives a loaded bike
Chainstay length is the gap between the seat tube and the rear axle, which a rack, panniers and your heels all have to share. Bottom bracket drop is how far the cranks sit below the axles. Both are compared against the median across every current frame we hold.
435mm chainstays, about the median for the 65 current frames here. Bottom bracket drop 65mm, 5mm less than the 70mm median. The fork publishes cargo mounts, and the frame publishes up to 1 bottle or accessory positions. Surly publishes no rear rack answer, which is not the same as no — but it is not something to buy a rack on. Widest published tire 76mm on 700c / 29in. It takes a dropper post.
Every figure above is the manufacturer's, computed against the rest of the database. It says what the frame allows, not how it feels — nobody here has ridden it.
What it can carry
Mount provision and clearance, as Surly publishes it.
Surly's wording: “29 x 3.0 in”
Geometry
All figures in millimeters except angles. Effective top tube and seat tube are the two that decide frame bag fit.
| Size | Eff. top tube | Seat tube | Standover | Head tube | Stack | Reach | Chainstay | Wheelbase | BB drop | Head angle | Seat angle |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Small | 585 | 368 | 770 | 90 | 593 | 404 | 435 | 1087 | 65 | 69° | 73° |
| Medium | 610 | 419 | 797 | 100 | 602 | 426 | 435 | 1113 | 65 | 69° | 73° |
| Large | 635 | 470 | 825 | 110 | 612 | 448 | 435 | 1138 | 65 | 69° | 73° |
| X-Large | 660 | 521 | 853 | 120 | 621 | 470 | 435 | 1164 | 65 | 69° | 73° |
Bottom bracket height
Roughly 310mm off the ground. Surly doesn't publish this directly — we derive it from their BB drop and a typical 75cm tire diameter, so treat it as indicative rather than exact. It changes with the tire you fit. Lower means more stable and more pedal strikes; higher means the opposite.
Source — Surly's own geometry chart: https://surlybikes.com/products/krampus-rigid-prickly-pear — checked 2026-08-16. A dash means the figure isn't published; we leave it blank rather than estimate.
Note: Current page has different geometry from older Krampus pages still indexed.
How the Krampus Rigid compares
Against the frames people actually cross-shop it with — both charts held together, on the specs that decide what the bike carries.
Questions people ask about this frame
Answered from what Surly publish. Where they publish nothing, that is what it says.
Does the Krampus Rigid take fork cargo cages?
Yes. Surly publish cargo-cage mounts on the fork, but the wording does not give a count we can stand behind, so we're not going to put a number on it.
What is the widest tyre the Krampus Rigid takes?
76mm on 700c / 29in. That is the frame figure rather than the fork's, and it is what limits a loaded bike.
Will a seat pack work on the Krampus Rigid?
The dropper is the problem, not the pack. This frame publishes dropper routing, and a dropper and a seat pack want the same space — fitting one rules out almost every strap-on seat pack and leaves rail-mounted bags at a fraction of the volume. Run a rack or a saddle-rail bag if you want both.
Which frame bags fit
Every frame bag we track, checked against this frame's published geometry. Pick your size.
Checking 16 frame bags against a 635mm effective top tube and 470mm seat tube. 16 fit.
Read these as conservative. This size has a steeply sloping top tube — the seat tube is only 74% of the effective top tube. Bag makers publish a minimum seat tube length assuming a roughly level top tube, so on a frame like this the comparison understates how much room you actually have. The front triangle here is about 1427 cm², which is the number that actually decides what fits. Several bags marked unlikely below will physically fit. Half-frame bags don't depend on seat tube length at all.
Frame bag fit is calculated from Surly's published geometry, so it's as reliable as their chart. Seat packs and handlebar rolls depend on your exposed seatpost and bar width, which no geometry table lists — the bag finder covers those once you add your own measurements.