Cube NuroadGeometry & Bikepacking Bag Fit2026
What this frame gives a loaded bike
Chainstay length is the gap between the seat tube and the rear axle, which a rack, panniers and your heels all have to share. Bottom bracket drop is how far the cranks sit below the axles. Both are compared against the median across every current frame we hold.
440mm chainstays, 5mm longer than the 435mm median across the 66 current frames here. Bottom bracket drop 70mm, close to the 70mm median. Cube publishes no fork cargo mounts, and no frame bottle positions are published. Cube states the frame does not take a rear rack. Widest published tire 45mm on 700c / 29in.
Every figure above is the manufacturer's, computed against the rest of the database. It says what the frame allows, not how it feels — nobody here has ridden it.
What it can carry
Mount provision and clearance, as Cube publishes it.
Fitting fenders costs 5mm of that.
Cube's wording: “45mm; 40mm with mudguards”
Geometry
All figures in millimeters except angles. Effective top tube and seat tube are the two that decide frame bag fit.
| Size | Eff. top tube | Seat tube | Standover | Head tube | Stack | Reach | Chainstay | Wheelbase | BB drop | Head angle | Seat angle |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XS | 518 | 470 | 749 | 113 | 530 | 384 | 440 | 1044 | 70 | 69° | 75.8° |
| S | 537 | 500 | 776 | 135 | 554 | 386 | 440 | 1045 | 70 | 70° | 74.7° |
| M | 560 | 530 | 808 | 165 | 589 | 389 | 440 | 1044 | 70 | 71.4° | 73.8° |
| L | 575 | 550 | 828 | 185 | 610 | 389 | 440 | 1046 | 70 | 72° | 73° |
| XL | 592 | 580 | 855 | 208 | 633 | 398 | 440 | 1058 | 70 | 72.5° | 73° |
Bottom bracket height
Roughly 305mm off the ground. Cubedoesn't publish this directly — we derive it from their BB drop and a typical 75cm tire diameter, so treat it as indicative rather than exact. It changes with the tire you fit. Lower means more stable and more pedal strikes; higher means the opposite.
Source — Cube's own geometry chart: https://www.cube.eu/uk-en/cube-nuroad-one-grovegreen-n-black/129200 — checked 2026-08-18. A dash means the figure isn't published; we leave it blank rather than estimate.
Note: 2026 Nuroad ONE, ArtNo. 129200. Cube publishes geometry in millimetres and degrees; standover is published as “Protrusion height - 80mm”. Price is Cube UK SRP in GBP. Fork cargo mounts are left empty: Cube’s fork line reads “CUBE Nuroad Flat Mount Disc, Full Carbon, 1 1/8" - 1 1/4" Tapered, Fender & Lowrider Mounts, QR”, which is fender and lowrider mounts rather than cage mounts.
Which frame bags fit
Every frame bag we track, checked against this frame's published geometry. Pick your size.
Checking 19 frame bags against a 560mm effective top tube and 530mm seat tube. 19 fit.
Frame bag fit is calculated from Cube's published geometry, so it's as reliable as their chart. Seat packs and handlebar rolls depend on your exposed seatpost and bar width, which no geometry table lists — the bag finder covers those once you add your own measurements.